A06B-0652-B012 FANUC DC Motor 20M Pulse coder

FANUC DC Servo motor A06B-0652-B012. This is a FANUC motor model 20M. The speed is 1500 rpm,  torque 23Nm, 18 Amp, 2 phases/213 Volts. This FANUC DC motor with straight shaft. This motor includes a FANUC Pulse coder 2500 pulses A860-0300-T002. Each FANUC Motor A06B-0652-B012 is tested and have a warranty. Motor driven by FANUC DC Servo drives. This FANUC DC Motor is ready to replace your defective motor from your CNC Machine-Tools, usually fitted on FANUC 6 CNC or first generation of FANUC 11 CNC.

Excessive heat is both a cause of FANUC DC Motor failure and a sign of other motor problems.

The primary damage caused by excess heat is to increase the aging rate of the insulation. Heat beyond the insulation's rating shortens winding life. After overheating, a motor may run satisfactorily but its useful life will be shorter. For maximum motor life, the cause of overheating should be identified and eliminated. Check your OVERLOADED DRIVE Machine, excess loads or jams in the driven machine for the FANUC DC Servo motor to supply higher torque, draw more current and overheat. A06B-0652-B012